APF-78 General purpose foamer for fresh water, brines, and any strength hydrochloric acid. Effective even in water contaminated with hydrocarbons.
SOLD IN: North America, Europe, Middle East
Cap-Foam DS Concentrated foamer for use in high temperature capillary, batch treatment, and coil tubing operations for clean-out, de-watering and de-salting of wells. Functions in high brine content and high calcium hardness waters, and is highly tolerant of condensate contamination.
SOLD IN: North America, Middle East
Cap-Foam HT Concentrated foamer for high temperature capillary and coil tubing applications for clean-out and de-watering of wells. Formulated with integral scale inhibition properties, produces excellent foam properties in high brine content and high calcium hardness waters, and is highly tolerant of condensate.
SOLD IN: North America, Europe, Middle East, North Sea
Cap-Foam HT NS Concentrated foamer with integral scale inhibitor for de-watering and cleanout in high temperature wells.
SOLD IN: Europe,Middle East,North Sea
Cap-Foam Plus Contains foaming agents, corrosion inhibitors and a scale inhibitor formulated into a single product.
SOLD IN: North America, Europe, Middle East
Cap-Foam SI multi-purpose
SOLD IN: North America, Europe, Middle East
Cap-Foam Ultra High temperature foamer for capillary and coil tubing applications for well clean-out and de-watering applications with integral corrosion and scale inhibition properties.
SOLD IN: North America, Europe, Middle East
FS-15 B Specialized formulation of anionic surfactants and foaming agents developed for removal of accumulated water from production gas wells.
SOLD IN: North America,Middle East
LFS-15 R Foam sticks formulated of nonionic and anionic surfactants and foaming agents for removal of accumulated water from production gas wells.
SOLD IN: North America,Middle East
MM-900 Highly active mixture of surface active agents and solvents thin and disperse water or oil based drilling muds to aid in their removal.
SOLD IN: North America, Middle East
SS-15 Specialized formulation of anionic surfactants and foaming agents developed for removal of accumulated water and condensate from production gas wells.
SOLD IN: North America,Middle East
SS-15 E North Sea-approved, specialized formulation of anionic surfactants and foaming agents for removal of water and condensate from production gas wells.
SOLD IN: North America,Europe,Middle East
WS-15 B
SOLD IN: North America,Middle East
WS-15 W Specialized formulation of nonionic and anionic surfactants and foaming agents developed for removal of accumulated water from production gas wells.
SOLD IN: North America,Middle East
XS-15 Anionic and nonionic surfactants and foaming agents formulated in foam sticks developed for removal of accumulated water from production gas wells.
SOLD IN: North America,Middle East
Oil Treating
PP-300 Liquid used to inhibit the formation of and remove deposits of paraffin from oil wells, pipelines and related equipment, and as a stimulation fluid additive to protect against paraffin problems.
SOLD IN: North America, Middle East
Scavengers
H2S-N Concentrated H2S neutralization agent used to reduce H2S in well test and flow back fluids during offshore well testing operations.
SOLD IN: North America, Middle East
HS-300 Organic sulfide scavenger rapidly complexes with hydrogen sulfide in aqueous or hydrocarbon fluids. Produces a stable, water-soluble byproduct, which functions as a corrosion inhibitor.
SOLD IN: North America, Middle East
HS-500 Concentrated organic sulfide scavenger effectively removes H2S to provide effective sweetening of wet gas streams in bubble tower or continuous injection applications. Eliminates solids deposition problems often encountered with other products.
SOLD IN: North America, Middle East
Scale Inhibitor
Remediation Surfactants
MFS-Green Biodegradable, nontoxic, high flash point blend of solvent and surfactants does not contain typical petroleum solvents used in treatment and removal of paraffin and asphaltene deposits in the reservoir matrix.
SOLD IN: North America, Europe, Middle East
StimOil® Regain Non-emulsifying complex nano-fluid blend designed for improved frac fluid recovery, remediation in producing and injection wells, decreased surfactant adsorption on shale and sand, and reducing water-oil water blocks, giving clean break at the oil/water interface.
SOLD IN: North America, Middle East
StimSolv-100 Complex nano-fluid improves production performance of oil and gas wells. Breaks emulsions, suspends fines, dissolves acid soluble scales, dissolves paraffin and asphaltenes deposits, water wets formation surface, reduces capillary imbibition pressures, and thus relieves water and condensate block problems.
SOLD IN: North America, Middle East
StimSolv-200 Developed to contain environmentally conscious materials, a complex nano-fluid for oil well remediation in limestone or sandstone formations. Reduces surface tension and provides non-emulsifier properties for regained permeability.
SOLD IN: North America, Middle East
Water Treating
CC-310T Replacement for solid potassium chloride (KCl) that offers superior performance at a lower cost -- without the handling, mixing, and disposal problems associated with bag KCl. Non-surface active formulation does not effect wettability, create foaming problems, or cause emulsions.
SOLD IN: North America, Europe, Middle East, North Sea
PC-205 Water soluble corrosion inhibitor intended for use in protecting casing, tubing, wellhead and production equipment or pipelines. Used in oil or gas producing wells and as a three phase inhibitor.
SOLD IN: North America, Middle East
Miscellaneous
AEP-20N Nonionic non-emulsifying agent compatible with a wide range of acidizing and fracturing fluids. Formulated to function with acid inhibitors. Works effectively in 15% to 28% Hydrochloric Acid.
SOLD IN: North America, Europe, Middle East
APF-27C Multi-purpose foamer concentrate for capillary tubing and drilling applications. Contains foaming agents and a scale inhibitor formulated into a single product. Produces foam in fresh, high brine, and high calcium content water.
SOLD IN: North America, Middle East
IKA-24 Mixture of chelating agents chelates both Fe+3 (ferric) and Fe+2 (ferrous) iron in acid solutions. Prevents formation of insoluble iron compounds that reduce permeability and formation of acid sludge caused by precipitated iron compounds.
SOLD IN: North America, Europe, Middle East
IKA-82 Helps prevent the precipitation of insoluble iron compounds by keeping the iron in a soluble form. helps to prevent the formation of acid sludge that may be caused by the presence of iron compounds.
SOLD IN: North America, Europe, Middle East, North Sea
NEC-15 Unique combination of non-surface active polyquaternary amine and surfactant designed to provide both clay protection and non-emulsification properties in a single additive package.
SOLD IN: North America,Middle East
PDF-100 Defoamer for aqueous based fluids applied by batch mixing, spraying or misting.
SOLD IN: North America, Europe, Middle East, North Sea
SI-103 Prevents deposition of salt in drilling muds and “wash out” in salt formations during drilling operations, and salt deposition in producing oil and gas wells.
