CAF-38 Powdered defoamer that is readily soluble in water and can be dry blended with bulk cement or added during the mixing of the cement slurry.
SOLD IN: North America, Middle East
Stop-Foam A multi-purpose, non-hazardous, environmentally responsible, liquid defoamer. Stop-Foam is stable in acid, alkaline, or neutral systems.
SOLD IN: North America,Europe,Middle East
Dispersants
CDI-26 Dispersant for oil well cements thins slurries to allow easier mixing and pumping. Lowers friction pressures and promotes turbulent flow of cement slurries at lower pumping rates.
SOLD IN: North America, Middle East
CDI-26L Liquid version of CDI-26 dispersant for use when dry blend facilities are not available.
SOLD IN: North America, Middle East
CDI-33 Cement slurry dispersant for use in a wide range of applications from 40 to 350°F shows superior performance in salt cement slurries, thins slurries to allow easier mixing and pumping, lowers friction pressures, and promotes turbulent flow of cement slurries at lower rates.
SOLD IN: North America, Middle East
CDI-33L Liquid version of CD-33 dispersant for use when dry blend facilities are not available.
SOLD IN: North America, Middle East
Lost Circulation
Celluseal Lost circulation product made from cellophane, sized to 3/8” flakes, produces maximum mat sealing at the face of the well bore wall.
SOLD IN: North America, Europe, Middle East
Poly Flakes Lost circulation product made from polyester film sized to 3/8 in. to produce maximum mat sealing at the face of the well bore wall in cementing operations.
SOLD IN: North America, Europe, Middle East
Kolseal Lightweight, economical granular solid with a specific particle size distribution for maximum bridging efficiency for lost circulation control. Also used as an extender and lightweight slurry additive.
SOLD IN: North America, Middle East
Flowstop-L Liquid alkali silicate material used to prepare reactive silicate solutions for drilling and cementing applications helps control subsurface brine flow, seal lost-circulation zones, and improve cement bonding and mud displacement.
SOLD IN: North America,Europe,Middle East
Fluid Loss Agents
CFL-80 Synthetic polymer derived from latex which controls fluid loss and helps control gas migration and provides excellent cement bonding. Non-retarding fluid loss additive that is intended for use at bottomhole temperatures of 60 to 180°F.
SOLD IN: North America, Middle East
CFL-110 Powdered blend of organic polymers provides excellent fluid loss control at temperatures below 180°F (82°C).
SOLD IN: North America, Middle East
CFL-115 Polymer combination that provides excellent fluid loss control and flow properties. Dispersing characteristics allow the design of low viscosity slurries.
SOLD IN: North America, Middle East
CFL-160 Powder blend of polymers gives fluid loss control to temperatures as high as 300°F (149°C). Mildly retarding, it may serve as both fluid loss controller and retarder at lower (<200°F (93°C)) temperatures.
SOLD IN: North America, Middle East
CFL-160L Non-aqueous liquid suspension of powdered CFL-160 for use when dry blend facilities are not available.
SOLD IN: North America, Middle East
CFL-175 Synthetic co-polymer used to control filtrate loss in a broad range of low to moderate temperatures. Also an effective retarder for moderate temperatures. Effective at BHCT’s up to and above 300°F.
SOLD IN: North America, Middle East
CFL-240 Cement fluid loss powder blend of polymers and dispersants for use at BHCT’s in excess of 180°F (82°C) up to 350°F (177°C) or more. Can give sufficient retardation for slurry placement at BHCT’s below 230°F (110°C).
SOLD IN: North America, Middle East
CFL-300 Organic polymer fluid loss material for moderate to high temperature ranges. Effective in high water ratio slurries. Thermally stable at higher temperatures. Effective in slurries containing up to 18% salt BWOW.
SOLD IN: North America, Middle East
Gas Control
CGC Liquid latex, readily soluble in water used to control gas during cementing operations. Effective aid in reducing fluid loss and permeability of cement slurry while in the transition phase also.
SOLD IN: North America, Middle East
Gascon Blend of synthetic polymer and microfine materials which controls fluid loss, minimizes free water, aids thixotropy to help control gas migration.
SOLD IN: North America, Middle East
Retarders
CR-180 Lignosulfonate-based cement retarder designed to give economical, reliable retardation of oil well cements in the BHCT range from 120°F (49°C) to 220°F (104°C).
SOLD IN: North America, Middle East
CR-180L CR-180 retarder dissolved in water to provide a liquid retarder for use when dry blending is not available.
SOLD IN: North America, Middle East
CR-270 Lignosulfonate/organic acid blend formulated to give optimal cement retardation for BHCT’s from above 200°F to more than 300°F.
SOLD IN: North America, Middle East
CR-270L Lignosulfonate/organic acid blend in a liquid solution that provides effective retardation of oil well cements at higher temperatures of up to 300°F and higher.
SOLD IN: North America,Middle East
CRX-350 Concentrated source of borate used to used with lignosulfonate or lignosulfonate blend retarders to boost retarder performance.
SOLD IN: North America, Middle East
Mud Flush/Spacer
MFC-35 Water soluble powder used along with surfactants such as MFC-57 to prepare washes to displace water based muds.
SOLD IN: North America, Europe, Middle East
MFC-47 Acidic, anionic surfactant/solvent blend used to loosen sludge and wall cake formed from mud/oil/clay interaction and improve mud displacement efficiency.
SOLD IN: North America, Europe, Middle East
MFC-57 Anionic surfactant solubile in water, brine, acid, or oil as a general purpose surfactant in pre-flushes for mud removal in cementing operations. Effective with either water or oil based muds.
SOLD IN: North America, Europe, Middle East
MFC-67 Anionic/Non-ionic surfactant/solvent combination for use in cement spacer systems to aid in mud removal.
SOLD IN: North America,Middle East
CSB-50 Surfactant for use as a cement preflush in mud clean-out acid and removal of oil film. Reduces surface and interfacial tension and is a strong water-wetter.
SOLD IN: North America,Middle East
CSB-100 Powder cement spacer for effective removal of drilling fluids ahead of cement slurry. Contains a surfactant that leaves the formation face water wet. Barite can be used to densify up to 18 lb/gal. Surfactants may be added for use with oil based drilling fluids.
SOLD IN: North America
Miscellaneous
CAC-97 Calcium chloride cement accelerator.
SOLD IN: North America, Middle East
Cemloc Allows mixing of cement/diesel oil at high densities used for water shutoff and for lost circulation problems while drilling. It . Promotes gelation and strength development when cement/diesel oil contacts formation water.
SOLD IN: North America, Europe, Middle East
Cemthix P Powdered thixotropic agent promotes gel strength development when cement is at rest, but thins when pumping is resumed. Gel structure allows cement to become self-supporting.
SOLD IN: North America, Middle East
CPF-X Liquid polymer concentrate yields viscosity rapidly on addition to fresh water or salt water to provide solids carrying ability to remove cuttings or cake solids from the hole.
SOLD IN: North America, Europe, Middle East
CPF-X Plus Liquid polymer concentrate with friction reducer added to help lower friction pressure in tubular goods. Provides solids carrying ability to remove cuttings or cake solids from the hole.
SOLD IN: North America, Europe, Middle East, North Sea
CSA-122 Sodium metasilicate for preparation of cement slurries at densities ranging from 14 lb/gal to 10.5 lb/gal (1.7-1.25 kg/l). Accelerates strength development and shorter "waiting on cement" times than an equivalent weight slurry using bentonite or other suspending agents.
SOLD IN: North America, Middle East
DMF-100 Drilling mud flush used to remove drilling mud and particulate matter from the formation faces and casing. MFC-57 improves water wetting ability of this viscous solution.
SOLD IN: North America, Europe, Middle East
FWCA Powdered polymer agent used to suspend solids, decrease free water, and reduce fluid loss in cement slurries.
SOLD IN: North America, Middle East
FWCA Liquid Non-aqueous suspension of FWCA
SOLD IN: North America, Middle East
LSP-Compacted Amorphous silica with an extensive surface area used to decrease cement slurry weight, increase slurry volume, and minimize free water.
SOLD IN: North America, Europe, Middle East
MFCA Natural mineral fiber used to increase the flexural strength and reduce permeability of cement. Also improves sulfate resistance and aids in minimizing gas migration.
SOLD IN: North America, Europe, Middle East
Silica Flour 270
SOLD IN: North America, Middle East
Silica Flour 325 Finely ground silica sand used to stabilize the strength and permeability of cement for use at temperatures above 230°F (110°C). Used at concentrations from 35% to 100% by weight of cement.
SOLD IN: North America, Middle East
XPC-1 Provides early expansion of cement during the setting phase, improved bonding to pipe and formation, reduces micro annulus problems, enhances zonal isolation, and prevents cement volume losses due to shrinkage.
SOLD IN: North America, Middle East
Specialty Cements
MC-500 Ultra-fine slag cement used to penetrate very small channels to repair casing leaks and cement bond problems and as a light weight cement.
SOLD IN: North America,Middle East
Foamers
APF-27 All purpose anionic water-wetting foamer for use cement, fresh water, and brines for temperatures to 275°F. Can be used in energeized fluids as well.
